8. RELATIONS BETWEEN MODES AND CONTROL FUNCTIONS
The relations between modes and control functions are summarized in Table 5.
The modes FORMAT EFFECTOR TRANSFER MODE, GUARDED AREA TRANSFER MODE, MULTIPLE AREA TRANSFER MODE, SELECTED AREA TRANSFER MODE, STATUS REPORT TRANSFER MODE and TRANSFER TERMINATION MODE do not affect the interpretation of control functions. They have an effect on the format of the transmitted data stream and on the format of the data transferred to an auxiliary input/output device:
In the case of the modes INSERTION REPLACEMENT MODE, KEYBOARD ACTION MODE and SEND/RECEIVE MODE there is no interaction with specific control functions. These modes have a uniform effect on all characters received.
The CONTROL REPRESENTATION MODE affects all control functions except RESET MODE (RM).
Those modes which uniformly apply to format effectors defined in this Standard also apply to the format effectors of the C0 set.
EDITING BOUNDARY MODE | ERASURE MODE | FORMAT EFFECTOR ACTION MODE | HORIZONTAL EDITING MODE | POSITIONING UNIT MODE | TABULATION STOP MODE | VERTICAL EDITING MODE | |
---|---|---|---|---|---|---|---|
CTC | X | ||||||
DCH | X | X | |||||
DL | X | X | X | ||||
EA | X | X | |||||
ECH | X | X | |||||
ED | X | X | |||||
EF | X | X | |||||
EL | X | X | |||||
FNT | X | ||||||
GSM | X | ||||||
GSS | X | ||||||
HPA | X | X | |||||
HPR | X | X | |||||
HTJ | X | ||||||
HTS | X | X | |||||
HVP | X | X | |||||
ICH | X | X | |||||
IL | X | X | X | ||||
IND | X | ||||||
JFY | X | ||||||
NEL | X | ||||||
PLD | X | ||||||
PLU | X | ||||||
QUAD | X | ||||||
RI | X | ||||||
SEE | X | ||||||
SGR | X | ||||||
SPI | X | ||||||
SSU | X | X | |||||
TBC | X | X | |||||
TSS | X | ||||||
VPA | X | X | |||||
VPR | X | X | |||||
VTS | X |
Table 5: RELATIONS BETWEEN MODES AND CONTROL FUNCTIONS